Instructions for use:

Safely block all passenger traffic from escalator before starting cleaning procedure

1)     Mount the cleaning pad, with the white side to the back of the device.

2)     Pre-spray dirty, neglected escalator treads.  Allow 5 to 10 minutes dwell time before cleaning.

3)     Fill saturation tub with specified amount of cleaning solution, place the device into the tub and compress firmly with pumping 

        action until the pad is saturated.

4)     Center the device with the oncoming escalator treads, place device on escalator and apply moderate downward pressure to 

         aid in the cleaning cycle.

Safety Tips:

1)     Never stand or step on the device

2)     Keep hands, loose items, clothing, hair & jewelry away from device during operation.

3)     Make sure escalator is completely dry before allowing passengers back on 

4)     Always use the handle to place and remove the device from the escalator

TREAD CLEAN & Dilution Recommendations:

REN™ developed TREAD CLEAN solution for use with Cleaning Pads to achieve maximum results for both restorative, deep cleaning and daily maintenance use. 

10:1 dilution ratio is recommended for Maintenance, Restorative and Emergency spill resolution.

                  
Recommended cleaning solution amount by pad size:

For a 24” pad  -- use 16-oz of diluted cleaning solution

For a 32” pad  -- use 20-oz of diluted cleaning solution

For a 40” pad  -- use 24-oz of diluted cleaning solution

Tips for more effective cleaning:   

1)     Perform a restorative cleaning to get your escalator up to your facilities standards

2)     Schedule regular maintenance cleanings and keep your escalators clean and safe